Welcome, Guest

Welcome to the AMTRA forum!

Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!

Page:
1
2
3
4

TOPIC: Bike repair/maintenance

Bike repair/maintenance 28 Aug 2015 06:41 #11924

John T Offline Platinum Boarder Brumm Brumm Posts: 564 Thank you received: 42	What are people doing to there bikes ?
	The administrator has disabled public write access.

Bike repair/maintenance 28 Aug 2015 07:24 #11925

Al Offline Platinum Boarder Posts: 1207 Thank you received: 119	Looking at it and saying why the hell am i at work not riding !!!!!!! Al
	The administrator has disabled public write access.

Bike repair/maintenance 28 Aug 2015 09:44 #11931

johnny d Offline Gold Boarder Posts: 169 Thank you received: 8	Just fitted aftermarket radiators to the fe350, slightly larger coolant capacity,,, gave it a shake down run to check for leaks etc. - bring on the weekend, Woodside here I come
	The administrator has disabled public write access.

Bike repair/maintenance 28 Aug 2015 10:30 #11932

twisti3s Offline Gold Boarder Posts: 279 Thank you received: 13	Check all the regular maintenance items before each ride fix anything that may have been an issue from previous ride.
	Beta 300RR MY15 - Serviced and race-prepped by Moto Melbourne The administrator has disabled public write access.

Bike repair/maintenance 28 Aug 2015 11:07 #11933

Gary Clarke Offline Gold Boarder Posts: 234 Thank you received: 9	Bit of a project I'm Ditching the 50mm Marzocchi front forks and replacing them with Ohlins , hopefully I will be able to modify the rear shock to fit as well , Ohlins all round
	The administrator has disabled public write access.

Bike repair/maintenance 28 Aug 2015 11:59 #11934

Willbar Offline Platinum Boarder Posts: 1101 Thank you received: 29	On the Berg, new triple clamp bearings, swing arm bearings, derust the stator on the hope it helps start better cold, rekluse adjustable slave cylinder and at this stage if I get over this cold I'm ridding Sunday and it will be on the old faith full kato as I won't get the Berg done by then.
	It is only when a mosquito lands on your balls that you realise there is always a way to solve problems without using violence The administrator has disabled public write access.

Bike repair/maintenance 28 Aug 2015 12:30 #11935

markjudkins
Offline
Gold Boarder
Posts: 184
Thank you received: 7

Just replaced the seat cover on Greg's Husky WR250. I learn't something today though.
I paid $50 for a ringmaster seat cover on Ebay which does not quite fit properly and as the staple gun i had wasn't powerful enough to penetrate the plastic seat I took the cover to First Class motorcycles who have fitted it for me for another $50 which is quite reasonable but I should have just taken the seat and foam to them in the first place and they would have fitted a basic custom seat cover for $120 or a custom seat cover with ridges and fancy bits for $160.

The administrator has disabled public write access.

Bike repair/maintenance 28 Aug 2015 12:35 #11936

Peter R Offline Platinum Boarder Posts: 1016 Thank you received: 47	I look at my FE350 !!!
	The administrator has disabled public write access.

Bike repair/maintenance 28 Aug 2015 13:25 #11938

Wiggy Online Gold Boarder Posts: 202 Thank you received: 11	Changed the inner clutch cover gasket on the 300. Waiting a few weeks to get over surgery and back out on the bike.
	Last Edit: 28 Aug 2015 13:26 by Wiggy. The administrator has disabled public write access.

Bike repair/maintenance 28 Aug 2015 15:04 #11939

twisti3s Offline Gold Boarder Posts: 279 Thank you received: 13	Gary Clarke wrote: Bit of a project I'm Ditching the 50mm Marzocchi front forks and replacing them with Ohlins , hopefully I will be able to modify the rear shock to fit as well , Ohlins all round why the change ?
	Beta 300RR MY15 - Serviced and race-prepped by Moto Melbourne The administrator has disabled public write access.

Page:
1
2
3
4

Forum

Main Public Forum

Amtra Public Forum

Bike repair/maintenance

Time to create page: 0.233 seconds