Phil Randall
Full Member 2011/2012
Posts: 216
|
 |
« on: January 30, 2012, 02,42:22 PM » |
|
MARYSVILLE SUNDAY 12TH FEBRUARY 2012 (NOT SATURDAY or MONDAY).
Meet at the bridge carpark Granton at 8.30 am for 9.00 start. Directions. Travel through Healsville and up the Black Spur to Narbathong. Take the Marysville road for 2.0 km. Cross over the bridge and turn hard left at the end of the safety railing. This will be an easy ride with lunch in Marysville. The policeman frowns on rec reg, so take your sandwiches if necessary. 100 km, see how we go. All welcome. Phil Randall. 0408 370 764.
|
Regards,
Phil Randall
|
|
|
georgesanos
Full Member 2011/2012
Posts: 29
|
 |
« Reply #1 on: January 30, 2012, 03,12:45 PM » |
|
Count me in Phil.
Cheers,
George
|
|
|
|
|
Rudi
Full Member 2011/2012
Posts: 63
Less strokes are better (2 stroke is a lifestyle)
|
 |
« Reply #2 on: January 30, 2012, 05,24:50 PM » |
|
Hey Phil
Please reserve a spot for me.
Cheers
Rudi
|
|
|
|
|
gms5
Full Member 2011/2012
Posts: 20
|
 |
« Reply #3 on: February 01, 2012, 08,17:40 AM » |
|
Hi Phil, I'm down as a reserve only for Saturdays ride (11/2) so can i join your list as well please. (hope that's not too cheeky  ) Cheers, Greg.
|
|
|
|
|
|
marko
Full Member 2011/2012
Posts: 42
|
 |
« Reply #4 on: February 01, 2012, 11,30:22 AM » |
|
Hi phil would like to come on this ride thanks. I missed petes last eildon ride ended up getting xrays on my rh wrist due to swelling & pain. Results indicated arthrtis in the joint due to old healed colles fracture & 5 other fractuers.(10 years ago) The doctor has put me on some anti inflammatory tabs(celecoxib) & i'll be wearing a wrist brace. Sometime down the track an operation involving re-alignment,screws,plates & pins needs to be considered along with joint re-surfacing. At this stage the specialist is reviewing the results.
|
|
|
|
|
Phil Randall
Full Member 2011/2012
Posts: 216
|
 |
« Reply #5 on: February 01, 2012, 11,34:00 AM » |
|
All welcome, I will count the numbers at 9.00 on the Sunday. If you are not there you will not be counted !!!. Phil R.
|
Regards,
Phil Randall
|
|
|
Mat R
Committee 2011/2012

Posts: 1351
President
|
 |
« Reply #6 on: February 01, 2012, 12,57:33 PM » |
|
Sometime down the track an operation involving re-alignment,screws,plates & pins needs to be considered along with joint re-surfacing.
Hope it's not down a Marysville track Marko, I don't think the AMTRA first aid kit is up to that.
|
When is the next ride?
|
|
|
|
marko
Full Member 2011/2012
Posts: 42
|
 |
« Reply #7 on: February 02, 2012, 03,18:49 PM » |
|
I was just using a figure of speech (down the track). Have been lifting 25kg lumps of k1045 steel in & out of the lathe today so the medication must be working i.e. no pain! Mat are you intending to turnup? 
|
|
|
|
|
Mat R
Committee 2011/2012

Posts: 1351
President
|
 |
« Reply #8 on: February 02, 2012, 03,43:12 PM » |
|
No can do on this ride, have the boys that weekend.
|
When is the next ride?
|
|
|
|
Marlo
Full Member 2011/2012
Posts: 9
|
 |
« Reply #9 on: February 02, 2012, 05,11:40 PM » |
|
Hi Phil mind if i join this ride new to amtra!? cheers Ty
|
|
|
|
|
|
David
Full Member 2011/2012
Posts: 63
|
 |
« Reply #10 on: February 03, 2012, 07,23:59 AM » |
|
Hi Phil, I'm in  See you there
|
|
|
|
|
Zeb Colic
Full Member 2011/2012
Posts: 530
On Any Weekend
|
 |
« Reply #11 on: February 03, 2012, 08,45:29 AM » |
|
Sometime down the track an operation involving re-alignment,screws,plates & pins needs to be considered along with joint re-surfacing.
Hope it's not down a Marysville track Marko, I don't think the AMTRA first aid kit is up to that. I was just using a figure of speech (down the track). Have been lifting 25kg lumps of k1045 steel in & out of the lathe today so the medication must be working i.e. no pain! Mat are you intending to turnup?  Lathe ? were do you work marko .
|
It dont matter what you ride as long as you ride often .
|
|
|
|
marko
Full Member 2011/2012
Posts: 42
|
 |
« Reply #12 on: February 03, 2012, 10,43:37 AM » |
|
Zeb ask lou van he knows me very well. I'm ok at the moment for carbide inserts. thanks marko.
|
|
|
|
|
|
madxr600
Posts: 4
|
 |
« Reply #13 on: February 04, 2012, 07,12:36 AM » |
|
Put me on the list I havent been out for a while
|
|
|
|
|
|
Mark C
Full Member 2011/2012
Posts: 30
|
 |
« Reply #14 on: February 06, 2012, 12,06:56 PM » |
|
Hi Phil, I'll bring my broom and sweep the carnage off the track for you. Hopefully I shouldn't be kept to busy Cheers Mark
|
|
|
|
|
|